Threaded Joints

Our professional Engineers offer our piping stress analysis services and structural engineering services across Canada. Regarding Industries we serve: Steel and Metals Industry, Energy and Power Generation Industry, Water and Wastewater Industry, Oil & Gas Industry, Chemicals and Plastics Industry, Pulp & Paper Industry, Facility Services.

Threaded joints are normally used in low-pressure small-bore, nonflammable service, although threaded iron pipe is commonly used in domestic and threaded joints up to NPS 12 (DN 300) have been used in low-pressure liquid service.

For quality joints, it is essential to have smooth, clean threads. Because cut-thread surfaces are somewhat imperfect, thread sealants (pipe dope) and lubricants are often used to ensure a leak-tight joint. Lubricants such as linseed oil or a compound containing powdered zinc or nickel are sufficient to produce a leak-tight joint in well-made threads. Imperfect threads may require white lead or plumber’s tape to provide a good seal. In high-pressure where leakage cannot be tolerated, the threaded joints may be seal-welded. Where seal welding is employed, all exposed threads

should be covered to prevent cracking in the weld.

Dimensional Standards. Dimensional standards for threads are established in ASME B1.20.1. This standard specifies dimensions, tolerances, and gauging for tape and straight pipe threads, including certain special applications. The normal type of pipe joint employs a tapered external and tapered internal thread. But straight pipe threads are used to advantage for certain types of pipe couplings, grease cup, fuel and oil fittings, mechanical joints for fixtures, and conduit and hose couplings. #Little_PEng

Originally published at https://www.littlepeng.com.